D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
In Stock

D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo

Item No.
Hitec RCD Inc. - HRC36845
4.3
$114.99
RC Club points earned on this item shown at checkout.
Product $114.99
Add Ons
Estimated Total: $114.99
Estimated Total: $114.99
The link to D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo has been copied
Selected Store
  • Speed: @4.8V .26sec/60' / @7.5V .17sec/60'
  • Torque: @4.8V 452oz/in / @7.4V 695oz/in
  • Programmable PWM Digital Amplifier
  • 32-Bit MCU with 12-Bit ADC Circuitry
  • 4096 Resolution
  • 1M Cycle Long Life Potentiometer
  • Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
  • Dual Ball Bearing Supported Output Shaft
  • 25-Tooth Output Spline
  • Coreless Metal Brush Motors
  • Nylon Reinforced Plastic Upper and Lower Case
  • Diamond Cut Aluminum Heat Sink Center Case
  • IPD 67 Rated Water Resistant and Waterproof Proof Case

Product Specs

Application
Giant Scale Cars
Bearing
Dual Ball Bearing
Bushing Or Bearing
Bearing
Connector Type
Universal
Current Draw Idle
30 mA
Current Draw Stall
10,000 mA
Deadband
1µs
Gear Type
Metal
Input Voltage
4.8V ~ 7.4V
Maximum Servo Speed
0.26 sec/60 deg @ 4.8V, 0.17 sec/60 deg @ 7.4V
Maximum Servo Torque
452oz/in @ 4.8V, 695oz/in @ 7.4V
Motor Type
Brushed
Product Height
2.44" (62 mm)
Product Length
2.6" (66 mm)
Product Weight
8.0 oz (227g)
Product Width
1.26" (32 mm)
Programmable
Yes
Servo Operating Voltage
4.8 - 8.4V (HV)
Servo Size Category
Giant Scale
Servo Type
Digital
Spline Count
15 - Tooth
Water-Resistant
Yes
Wire Gauge
20 AWG

Highlights of the D-Series Servos

The D845WP servo is a IP-67 rated servo capable of being truly waterproof, dust resistant, and ready for 1/5th-scale Rock Crawlers and Off-Road Trucks. As with our entire “D” line, this technologically-advanced servo is powered by our 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. The unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. With incredibly durable steel gears, dual ball bearing and hardened steel output shaft, the high-end performing D845WP produces the mighty torque and reliability required to take bashers to the next level.

Product Details

icon-box
In The Box
  • (1) D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo