Discontinued | This Item is No Longer Available

D950TW Standard Digital Ultra Torque Titanium Gear Servo

Item No.
Hitec RCD Inc. - HRC36950
Selected Store
  • Speed: @4.8V .26sec/60' / @7.4V .14sec/60'
  • Torque: @4.8V 292oz/in / @7.4V 486oz/in
  • Programmable PWM Digital Amplifier
  • 32-Bit MCU with 12-Bit ADC Circuitry
  • 4096 Resolution
  • 1M Cycle Long Life Potentiometer
  • Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
  • Dual Ball Bearing Supported Output Shaft
  • 25-Tooth Output Spline
  • Coreless Metal Brush Motors
  • Nylon Reinforced Plastic Upper and Lower Case
  • Diamond Cut Aluminum Heat Sink Center Case
  • Dust Resistant and Splash Proof Case

Product Specs

Application
High Performance Aircraft, Cars, Boats
Bearing
Dual Ball Bearing
Bushing Or Bearing
Bearing
Connector Type
Universal
Current Draw Idle
30 mA
Current Draw Stall
6,200 mA
Deadband
1µs
Gear Type
Metal
Input Voltage
4.8V ~ 6.0V ~ 7.4V
Maximum Servo Speed
0.23 sec/60 deg @ 4.8V, 0.17 sec/60 deg @ 6.0V, 0.14 sec/60 deg @ 7.4V
Maximum Servo Torque
292oz/in @ 4.8V, 403oz/in @ 6.0V, 486oz/in @ 7.4V
Motor Type
Brushed
Product Height
1.5" (38 mm)
Product Length
1.57" (40 mm)
Product Weight
2.40 oz (68.0g)
Product Width
0.79" (20 mm)
Programmable
Yes
Servo Operating Voltage
4.8 - 7.4V (HV)
Servo Size Category
Standard
Servo Type
Digital
Spline Count
25 - Tooth
Water-Resistant
No
Wire Gauge
20 AWG

Compatibility

No results for your given fitment filters

Highlights of the D-Series Servos

The titanium D-950TW is part of our D-Series servo line. All Hitec D-Series servos have been designed using brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.

Product Details

icon-box
In The Box
  • (1) D950TW Standard Digital Ultra Torque Titanium Gear Servo
D950TW Standard Digital Ultra Torque Titanium Gear Servo