In Stock

D955TW Standard Digital Monster Torque Titanium Gear Servo

Item No.
Hitec RCD Inc. - HRC36955
$114.99
RC Club points earned on this item shown at checkout.
Product $114.99
Add Ons
Estimated Total: $114.99
Estimated Total: $114.99
Selected Store
  • Speed: @4.8V .19sec/60' / @7.4V .12sec/60'
  • Torque: @4.8V 251oz/in / @7.4V 404oz/in
  • Programmable PWM Digital Amplifier
  • 32-Bit MCU with 12-Bit ADC Circuitry
  • 4096 Resolution
  • 1M Cycle Long Life Potentiometer
  • Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
  • Dual Ball Bearing Supported Output Shaft
  • 25-Tooth Output Spline
  • Coreless Metal Brush Motors
  • Nylon Reinforced Plastic Upper and Lower Case
  • Diamond Cut Aluminum Heat Sink Center Case
  • Dust Resistant and Splash Proof Case

Product Specs

Application
High Performance Aircraft, Cars, Boats
Bearing
Dual Ball Bearing
Bushing Or Bearing
Bearing
Connector Type
Universal
Current Draw Idle
30mA
Current Draw Stall
5200 mA
Deadband
1µs
Gear Type
Metal
Input Voltage
4.8V ~ 7.4V
Maximum Servo Speed
0.19 sec/60 deg @ 4.8V, 0.12 sec/60 deg @ 7.4V
Maximum Servo Torque
251oz/in @ 4.8V, 404oz/in @ 7.4V
Motor Type
Brushed
Product Height
1.46" (37 mm)
Product Length
1.57" (40 mm)
Product Weight
2.33 oz (66.0g)
Product Width
0.78" (20 mm)
Programmable
Yes
Servo Operating Voltage
4.8 - 7.4V (HV)
Servo Size Category
Standard
Servo Type
Digital
Spline Count
25 - Tooth
Water-Resistant
No
Wire Gauge
20 AWG

Compatibility

No results for your given fitment filters

Highlights of the D-Series Servos

The power of Hitec’s D-Series servos continues with the introduction of the next Premium Class trio: the D930SW, D954SW and D955TW. As with our entire “D” line, these technologically-advanced servos are powered by our 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. Their unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. The reliably-strong titanium-geared D955TW replaces the well-known HS-7955TH. Advancing servo technology and providing superior engineering has always been Hitec’s mission and that continues today as we expand our outstanding D-Series product line.

Product Details

icon-box
In The Box
  • (1) D955TW Standard Digital Monster Torque Titanium Gear Servo
D955TW Standard Digital Monster Torque Titanium Gear Servo