HS-765HB Giant Scale Analog Karbonite Gear Sail Arm Servo
HS-765HB Giant Scale Analog Karbonite Gear Sail Arm Servo
HS-765HB Giant Scale Analog Karbonite Gear Sail Arm Servo
HS-765HB Giant Scale Analog Karbonite Gear Sail Arm Servo
HS-765HB Giant Scale Analog Karbonite Gear Sail Arm Servo
In Stock

HS-765HB Giant Scale Analog Karbonite Gear Sail Arm Servo

Item No.
Hitec RCD Inc. - HRC33765S
5
$49.99
RC Club points earned on this item shown at checkout.
Product $49.99
Add Ons
Estimated Total: $49.99
Estimated Total: $49.99
The link to HS-765HB Giant Scale Analog Karbonite Gear Sail Arm Servo has been copied
Selected Store
  • Speed: @4.8V .28sec/60' / @6.0V .23sec/60'
  • Torque: @4.8V 153oz/in / @6.0V 183oz/in
  • 4.9 inch Sail Arm with 140* Movement
  • Strong Karbonite Gear Train
  • Dual Ball Bearing-Supported Output Shaft
  • Water and Dust-Resistant Case

Product Specs

Application
Sailboats
Bearing
Dual Ball Bearing
Bushing Or Bearing
Bearing
Connector Type
Universal
Current Draw Idle
8 mA
Current Draw Stall
1,800 mA
Deadband
5µs
Gear Type
Karbonite
Input Voltage
4.8V ~ 6.0V
Maximum Servo Speed
0.28 sec/60 deg @ 4.8V, 0.23 sec/60 deg @ 6.0V
Maximum Servo Torque
153oz/in @ 4.8V, 183oz/in @ 6.0V
Motor Type
Brushed
Product Height
1.96" (50 mm)
Product Length
2.32" (59 mm)
Product Weight
3.88oz (110.0g)
Product Width
1.14" (29 mm)
Programmable
No
Rotation Range
140 Degrees
Servo Operating Voltage
4.8 - 6.0V
Servo Size Category
Giant Scale
Servo Type
Analog
Spline Count
24 - Tooth
Water-Resistant
No
Wire Gauge
22 AWG
The HS-765HB sail arm servo has up to 140 degrees of travel and comes with a Heavy Duty 4.5 inch arm. With its dual ball bearing supported output shaft the HS-765HB will provide years of reliable service for your R/C sailing applications to 2 meters.

Product Details

icon-box
In The Box
  • (1) HS-765HB Giant Scale Analog Karbonite Gear Sail Arm Servo
HS-765HB Giant Scale Analog Karbonite Gear Sail Arm Servo